How to Be Your Own General Contractor (Owner-Builder) in 2026

How to act as your own general contractor on a home project: permits, hiring subcontractors, scheduling, insurance, liens and the risks to weigh first.

By Seayora Editorial Team · Published · Facts checked · 2 min read

Short answer: To be your own general contractor, you take on what a GC does: plan the project, get permits as an owner-builder where your area allows, hire and schedule each trade, buy materials, arrange inspections, manage changes and pay everyone with lien waivers. It can save the GC’s markup, but you carry the responsibility for code compliance, site safety, delays and coordination, and lenders and insurers may treat the project differently. Check your local owner-builder rules and insurance before you start.

Key takeaways

  • You take on permits, scheduling, purchasing, inspections and payments.
  • Owner-builder permits are allowed in many places, with conditions.
  • Hire licensed, insured trades and collect lien waivers.
  • Check your insurance and any lender rules before starting.
  • The saving is real only if you can manage the time and risk.

Can you be your own general contractor?

Often, for work on your own home. Many building departments issue owner-builder permits, sometimes with conditions such as living in the home or limits on selling it soon after. Licensed trades are usually still required for electrical, plumbing and mechanical work. Ask your building department what applies.

How do you act as your own general contractor?

  1. Define the scope with drawings or a detailed plan.
  2. Apply for permits as the owner-builder where allowed.
  3. Get written bids from each trade; check licenses and insurance (see how to check a contractor’s license).
  4. Build a schedule in the order trades must work, with inspection points.
  5. Order materials ahead so crews are not waiting.
  6. Book inspections and do not cover work before it passes.
  7. Pay each trade on completed work with lien waivers.
  8. Track every cost and change against the budget.

What are the risks of being your own GC?

  • Code, permit and inspection responsibility is yours.
  • Delays when trades overlap, materials are late or work fails inspection.
  • Liability for injuries on your site; check your homeowner’s policy.
  • Mechanics liens if a sub or supplier goes unpaid.
  • Lenders may require a licensed GC for construction loans.

Does being your own general contractor save money?

It can save the general contractor’s overhead and profit, but only if you manage the schedule, the trades and the budget well; delays and mistakes can cost more than the markup. Our guide on how to find a good contractor helps if you decide to hire one instead.

Frequently asked questions

Do I need a license to be my own general contractor?

Usually not for your own home where owner-builder permits are allowed, but licensed trades are often still required for electrical, plumbing and mechanical work.

Can I get a construction loan as an owner-builder?

Some lenders allow it; many require a licensed general contractor. Ask before you plan the project.

What permits does an owner-builder need?

The same permits any contractor would: building and, where applicable, electrical, plumbing and mechanical permits, from your local building department.

How Seayora helps

Find a pro: Find local trades with credentials and ratings shown, and send requests from one form.

How we write and check these guides: editorial standards.

Related on Seayora

Explore Seayora