Does a landlord have to install smoke detectors?

It depends on the state. Seayora holds a published statute for 36 states and the District of Columbia. The table below gives the figure for each, with the statute it comes from.

Smoke alarms, state by state

StateSmoke alarmsSource
AlaskaLandlord provides; tenant keeps batteries charged, testsAlaska Stat. § 18.70.095
ArizonaRequired in new or remodeled units; tenant maintainsA.R.S. §§ 36-1636, 36-1637, 36-1639
CaliforniaOwner ensures alarms work; tenant reports failuresCal. Health & Safety Code § 13113.7
ConnecticutFire Safety Code requires them in residential buildingsConn. Gen. Stat. § 29-292
DelawareOwner installs and maintains; tenant keeps battery working16 Del. C. §§ 6631, 6632, 6633, 6635; 25 Del. C. § 5503
District of ColumbiaOwner installs smoke and CO detectors per building codesD.C. Code §§ 6-751.01, 6-751.02
FloridaLandlord installs at move-in in houses and duplexesFla. Stat. § 83.51
GeorgiaRequired in every dwelling unit; occupant maintainsO.C.G.A. § 25-2-40
IdahoLandlord installs and verifies; tenant maintainsIdaho Code § 6-320
IllinoisOwner installs; tenant tests and replaces batteries425 ILCS 60/3
IndianaOwner installs and repairs; occupant tests every 6 monthsInd. Code §§ 22-11-18-2, 22-11-18-3.5, 22-11-18-5.5
IowaRequired in rentals; owner fixes within 30 days of noticeIowa Code § 10A.518
KansasOwner installs; occupant of a rental tests and maintainsK.S.A. 31-161, 31-162
LouisianaTen-year sealed-battery alarm in 1-2 family rentalsLa. R.S. 40:1581
MaineLandlord provides; tenant keeps batteries charged, tests25 M.R.S. § 2464
MarylandLandlord installs and repairs; tenant testsMd. Code, Pub. Safety §§ 9-101, 9-102, 9-104, 9-105, 9-106
MassachusettsOwner installs; AC or monitored battery detectorsM.G.L. c. 148, §§ 26C, 26E, 26F
MichiganOwner installs; at least one alarm in each unitMCL 125.1504c, 125.482a, 125.401
MinnesotaOwner maintains; tenant reports failure within 24 hoursMinn. Stat. § 299F.362
MontanaLandlord installs and verifies; tenant maintainsMont. Code Ann. § 70-24-303
NebraskaOwner installs; month-plus tenant tests, replaces batteryNeb. Rev. Stat. §§ 81-5,142, 81-5,144
NevadaOwner equips each unit in buildings of 3+ unitsNRS 477.140
New HampshireRental units equipped to NFPA codes; owner maintainsRSA 153:10-a
New Jersey1–2 family homes need alarms; certificate before leasingN.J.S.A. 52:27D-198.1, 52:27D-198.2, 52:27D-198.3
New YorkAlarms required; owner installs, tenant keeps in repairN.Y. Exec. Law § 378; N.Y. Mult. Dwell. Law § 68
North CarolinaLandlord installs; tenant replaces batteriesN.C. Gen. Stat. §§ 42-42, 42-43
North DakotaRequired; tenant maintains, landlord checks at each move-inN.D. Cent. Code § 23-13-15
OklahomaOwner installs; landlord explains testing; tenant checks74 O.S. § 324.11a
OregonOwner installs; tenant tests at least every 6 monthsORS 479.255, 479.270, 479.275, 479.300, 90.325
Rhode IslandFire Safety Code sets alarm rules; 3-family homes equippedR.I. Gen. Laws §§ 23-28.1-2, 23-28.1-7
South CarolinaOwner installs; tenant reports defects in writingS.C. Code §§ 5-25-1310, 5-25-1320, 5-25-1330, 23-9-155
TennesseeOwner installs; tenant maintains; owner checks at turnoverTenn. Code Ann. § 68-102-151
TexasLandlord installs and tests; tenant must not disableTex. Prop. Code §§ 92.253, 92.255, 92.258, 92.2611
VirginiaLandlord certifies alarms work; tenant maintains themVa. Code §§ 55.1-1220, 55.1-1227, 36-99.5, 15.2-922
WashingtonOwner installs; tenant maintains and replaces batteriesRCW 43.44.110, 59.18.060, 59.18.130
West VirginiaOwner installs and replaces; tenant maintainsW. Va. Code § 15A-10-12
WisconsinOwner installs; occupant maintains; owner fixes in 5 daysWis. Stat. §§ 101.145, 101.645, 101.61

This is a summary of a published statute, not legal advice. Rules change, local ordinances can add to them, and the terms of a specific lease may differ. Check the citation and speak to a lawyer before acting.

Only states where Seayora holds a published statute appear above. Where no statute is recorded, no figure is shown rather than a guess.

The answer in full, for the biggest rental markets

Does a landlord have to install smoke detectors in California?

In California, state-approved smoke alarms must be installed in every dwelling unit, and the owner of a rented unit must test and maintain them and make sure they work when a new tenancy begins, while the tenant must report an inoperable alarm. Smoke alarms approved and listed by the State Fire Marshal must be installed, following the manufacturer’s instructions, in each dwelling unit intended for human occupancy, which includes one- and two-unit dwellings, apartment complexes and condominiums. Unless local rules prohibit it, a battery-operated smoke alarm that met the State Fire Marshal’s standards when installed satisfies the requirement. The owner of a rented apartment complex or other multiple-dwelling complex, and since January 1, 2014 the owner of a rented single-family dwelling, is responsible for testing and maintaining the alarms, must make sure they are operable when a new tenancy is created, and may enter a unit to install, repair or test them after reasonable written notice, presumed to be 24 hours. The tenant must notify the manager or owner of an inoperable smoke alarm, and the owner is not in violation for a deficient alarm it has not been told about. A violation is an infraction punishable by a fine of up to $200 for each offense. Local building and fire codes can add their own requirements. This is Cal. Health & Safety Code § 13113.7.

More on California

Does a landlord have to install smoke detectors in Texas?

In Texas, a landlord must install a smoke alarm in each separate bedroom, plus one in a corridor serving several bedrooms and one on each level, test it at the start of the tenancy and repair it when the tenant asks, while a tenant who removes the battery or disables an alarm can be liable. The landlord must install at least one smoke alarm in each separate bedroom; a studio’s alarm goes inside the room, a corridor serving several bedrooms needs one nearby, and a unit with multiple levels needs one on each level. An alarm may be battery-powered and need not be interconnected in a unit occupied or given a certificate of occupancy before September 1, 2011. The landlord must test the alarm at the beginning of the tenant’s possession and, during the lease, must inspect and repair it within a reasonable time when the tenant reports a malfunction or asks, but is not obligated to provide batteries after move-in if the alarm worked then. A tenant who removes a battery without immediately replacing it with a working battery, or knowingly disconnects or intentionally damages an alarm, is liable for the landlord’s damages and, if the lease carries the required underlined or bold notice, a civil penalty of one month’s rent plus $100. The subchapter does not apply to an owner-occupied unit with no part leased, a unit in a building five or more stories high where smoke alarms are regulated by local ordinance, or a licensed nursing home. Local building and fire codes can add their own requirements. This is Tex. Prop. Code §§ 92.253, 92.255, 92.258, 92.2611.

More on Texas

Does a landlord have to install smoke detectors in Florida?

In Florida, unless the parties agree otherwise in writing, the landlord of a single-family home or duplex must install working smoke detection devices when the tenancy begins. Unless otherwise agreed in writing, at the commencement of the tenancy of a single-family home or duplex, the landlord must install working smoke detection devices. A smoke detection device is an electrical or battery-operated device that detects visible or invisible particles of combustion and is listed by Underwriters Laboratories, Factory Mutual Laboratories, or another nationally recognized testing laboratory. For other dwelling units, the statute’s list of landlord provisions does not mention smoke detectors, but the landlord must at all times comply with applicable building, housing and health codes. A tenant may not raise the landlord’s noncompliance with this subsection as a defense to an action for possession. Local building and fire codes can add their own requirements. This is Fla. Stat. § 83.51.

More on Florida

Does a landlord have to install smoke detectors in New York?

In New York, a one- or two-family home used as a residence must have an operable smoke alarm audible in every bedroom, and in apartment buildings covered by the Multiple Dwelling Law the owner installs alarms in each unit while the tenant keeps them in repair. The state uniform code must require every one- or two-family dwelling, and every condominium or cooperative unit used as a residence, to have an operable single-station smoke detecting alarm device clearly audible in each bedroom with the doors closed, and every residential building with common spaces shared by three or more units to have alarms audible in each common space; battery-operated devices are permitted. In a multiple dwelling covered by the Multiple Dwelling Law, the owner must equip each apartment with approved, operational smoke detecting devices, with at least one no more than ten feet from the entrance to any bedroom, replace within thirty days of written notice a device that fails within a year from a manufacturing defect, re-equip the unit at each vacancy, and notify tenants in writing of the owner’s and tenants’ duties. In a class A multiple dwelling the tenant must keep the device in good repair and replace any device that becomes inoperable during the tenancy. Local building and fire codes can add their own requirements. This is N.Y. Exec. Law § 378; N.Y. Mult. Dwell. Law § 68.

More on New York

Does a landlord have to install smoke detectors in Illinois?

In Illinois, the owner must supply and install approved smoke detectors, and the tenant tests and maintains the detectors in the unit and replaces their batteries. Every dwelling unit must have at least one approved smoke detector within 15 feet of every room used for sleeping, a single family residence needs one on every story including basements, and a building with more than one dwelling unit needs one at the top of each interior stairwell. The owner must supply and install all required detectors, give one tenant per unit written information on testing and maintenance, and make sure the batteries work when the tenant takes possession. The tenant must test and maintain the detectors in the unit, replace the batteries, and notify the owner in writing of deficiencies the tenant cannot correct. A battery-powered detector that is newly installed, more than 10 years old, or failing must use a self-contained, non-removable, long-term battery, and units newly built or substantially remodeled after December 31, 1987 need detectors permanently wired into the AC power line, interconnected when more than one is required. Local building and fire codes can add their own requirements. This is 425 ILCS 60/3.

More on Illinois

Does a landlord have to install smoke detectors in Georgia?

In Georgia, every dwelling unit in an apartment, house, condominium or townhouse must have an approved smoke detector, battery-operated at minimum in units built before July 1, 1987, and an occupant who fails to keep it working can be fined. Every new dwelling and dwelling unit within an apartment, house, condominium and townhouse built on or after July 1, 1987 must have an approved listed smoke detector installed according to the manufacturer’s recommendations. Since July 1, 1994, every dwelling unit constructed before July 1, 1987 must have at least an approved battery-operated smoke detector maintained in good working order. A detector must be mounted centrally in the corridor or area giving access to each group of sleeping rooms, and on each story, including cellars and basements, of a multi-story unit. An occupant who fails to maintain a smoke detector in good working order is subject to a fine of up to $25, with a warning for a first violation. Failure to maintain a smoke detector is not evidence of negligence and may not be considered on any question of liability. Local building and fire codes can add their own requirements. This is O.C.G.A. § 25-2-40.

More on Georgia

Does a landlord have to install smoke detectors in North Carolina?

In North Carolina, the landlord provides and installs operable listed smoke alarms, makes sure they work and puts in new batteries at the start of each tenancy, and the tenant replaces the batteries as needed and may not disable them. The landlord must provide operable smoke alarms, battery-operated or electrical, with an Underwriters Laboratories or equivalent listing, installed to National Fire Protection Association standards or the manufacturer’s instructions, and must repair or replace an alarm within 15 days after written notice from the tenant. Since December 31, 2012 any new or replacement alarm must be a tamper-resistant, 10-year lithium battery smoke alarm unless the unit has a hardwired alarm with battery backup or a qualifying combined smoke and carbon monoxide alarm. Unless the parties agree otherwise in writing, the landlord puts new batteries in a battery-operated alarm at the start of each tenancy and the tenant replaces batteries as needed, except for a 10-year sealed alarm. The tenant must not render a smoke alarm inoperable and must notify the landlord in writing of needed repairs; the same statute requires carbon monoxide alarms in units with fuel-burning appliances or an attached garage. Local building and fire codes can add their own requirements. This is N.C. Gen. Stat. §§ 42-42, 42-43.

More on North Carolina

Does a landlord have to install smoke detectors in Michigan?

In Michigan, the owner of an existing building constructed before November 6, 1974 must install smoke alarms under state rules, which must call for at least one single-station smoke alarm in each dwelling unit. The owner of an existing building or structure constructed before November 6, 1974 must install one or more smoke alarms as provided in rules the director must promulgate, and for single family, two-family and multiple family dwellings those rules must require at least one single-station smoke alarm in each dwelling unit. A building that is renovated, reconstructed, added to or changed in use must meet the state construction code’s smoke alarm requirements. Separately, under the housing law of Michigan, each dwelling unit in a class "A" multiple dwelling must be equipped with a single-station or multiple-station smoke alarm meeting the state construction code, the owner must comply, and a violation is a misdemeanor; that law applies in each city, village and township with a population of 10,000 or more. Local building and fire codes can add their own requirements. This is MCL 125.1504c, 125.482a, 125.401.

More on Michigan

How Seayora uses this rule

A tenant can report a missing or dead alarm as a repair request in Seayora, on the website or either phone app, and the request keeps the date it was made and every update after it.

Guides on this rule

Other rules compared across states

Every rule for one state

Related